Epoxy Floor Installation in Lennox, SD | Professional Finish
Lennox sits about 20 miles southwest of Sioux Falls, a Lincoln County town with roots in the railroad era and homes built across more than a century. Sioux Falls Premier Epoxy Floors installs epoxy floor systems here for garages, basements, workshops, and small commercial spaces. What separates a professional floor from a weekend kit isn't the color on the box. It's the work you see up close: straight lines along the walls, even coverage across the whole surface, a clean edge under the garage door, and a topcoat free of bubbles, roller marks, and trapped debris.
Those details come from the steps that happen before and after the coating goes down. Thorough grinding, careful edge work, clean mixing, and patient recoat timing all show up in the final look. We talk through the finish options with you, from tight-chip flake and solid colors to quartz and metallic epoxy, and we explain what the finished floor should look like so you know exactly what to expect. Request a quote, and we'll come out, look at the concrete, and show you how we'd handle the edges, transitions, and trouble spots in your space.
Request a FREE Quote.
Get the numbers you need to plan with confidence—no pressure, just clear and honest pricing.
The Standard We Hold Ourselves To
Sioux Falls Premier Epoxy Floors measures a professional finish by the details most people don't notice until they're wrong. Before we start, we describe exactly what the finished edges, door line, and broadcast coverage should look like, so you know the standard we're holding ourselves to. Our crew arrives with everything needed to finish each stage, so there are no half-done days spent waiting on a missing part. For Lennox homeowners and businesses, we work cleanly and keep paths clear for anyone who needs to get by. And the job isn't finished until you've walked the floor with us and every item on the punch list has been taken care of.
A Railroad Name and a Steady Small Town
The town was settled in 1879 and named after Ben Lennox, private secretary to the general manager of the Milwaukee Railroad. It incorporated on May 19, 1889, and grew quickly in its early decades, from just 89 residents in 1880 to 591 by 1900 and past 1,000 by 1920. Growth slowed after that but never really stopped. The population held between about 1,100 and 1,350 through the middle of the century, climbed to 1,827 by 1980, and reached 2,423 at the 2020 census, with a 2022 estimate of 2,466. The last census counted 961 housing units and a median age of 38.1.
One local quirk: South Dakota Highway 17 is only a mile long, running along the eastern edge of Lennox from SD 44 to 278th Street. It once continued north to SD 42 west of Sioux Falls, until the state legislature turned that stretch over to local control in 2018. Families here are served by Lennox School District 41-4, which runs Lennox Elementary and LWC Intermediate along with LWC Junior High and Lennox High School. In a town this size, neighbors compare notes, so the finish on one garage floor is often the best advertisement for the next one down the street.
Details That Make a Professional Finish
A professional finish shows at the edges. Many attached garages have a short concrete curb along the walls, called a stem wall, and coating it in the same system gives the room a clean, finished look while protecting that concrete from salt and water splash. We cut a straight line along the top of the stem wall or the base of the drywall, rather than leaving drips and a wavy edge. The garage door threshold gets the same care: the bottom seal is protected or lifted, and the coating runs cleanly under the door line, so there's no bare strip where the door closes. Around support posts, water heater stands, and shelving brackets, we hand-detail instead of rolling up close and calling it done.
The field of the floor tells the rest of the story. A full flake broadcast covers the base coat completely, with no bald spots, thin patches, or areas where the color underneath peeks through. Partial broadcasts can look great too, but the spacing should be even across the whole floor, not heavy in the middle and sparse at the edges. Small defects like pinholes, fisheyes, and roller lines usually trace back to rushed prep or contamination. Silicone from tire shine, protectant sprays, and some cleaners can cause fisheyes, where the coating pulls away and leaves small craters, so we ask you to stop using those products in the space a few weeks before install.
Finish Options for Lennox Homes and Shops
Professional doesn't have to mean plain. Flake comes in chip sizes from about a sixteenth of an inch up to a quarter inch, and the size changes the look as much as the color does. Smaller chips read as a tight, granite-like texture that suits a finished basement or home office, while larger chips give a garage a bolder, speckled pattern. Metallic epoxy, which swirls pigments into a marbled, three-dimensional finish, works well in basement rec rooms and small storefronts where people will actually notice the floor. For workshops, a solid color with a light flake scatter keeps dropped screws, washers, and small parts easy to spot.
The places where one surface meets another are where amateur jobs give themselves away. Steps into the house can be coated to match the floor, with a slip-resistant texture on the treads and a clean edge where the step meets the door jamb. Where a coated basement meets carpet or vinyl plank, we finish to a crisp, straight line instead of a ragged edge the trim has to hide. Outside, the concrete apron in front of the garage door takes direct sun and repeated freezing and thawing, so we stop the epoxy at the door line rather than carrying it onto a surface it isn't suited for. Knowing where to stop is part of a professional finish, too.
From Bare Concrete to a Professional Finish
Step 1 — Initial Call and Finish Goals
Tell us about the space and the look you're after, from a tight-chip garage floor to a metallic basement or a durable quartz finish for a small business in town. Photos of the floor, the stem walls, and the garage door threshold help us spot finish challenges early. We'll also ask about the products you use in the garage, since silicone-based sprays can affect the final result. If you've seen a floor you like in a neighbor's garage, tell us what stood out.
Step 2 — Site Visit and Detail Mapping
We make the 20-mile drive southwest from Sioux Falls and walk the space with you. Along with measuring the floor and testing for moisture, we note every spot that needs hand detailing: stem walls, steps into the house, support posts, the door threshold, and transitions to other flooring. We check for oil, sealers, and old coatings that could cause fisheyes or poor bonding. Then we talk through how each edge and transition will be finished.
Step 3 — Estimate With a Clear Finish Standard
Your estimate lists prep, repairs, the coating system, the topcoat, and the schedule, along with the finish details included, such as stem wall coating and threshold work. It also spells out the broadcast coverage and chip size you chose. That way, the standard for the finished floor is written down before work begins. If you'd like to compare flake against metallic or quartz, we'll lay those options out side by side.
Step 4 — Scheduling and Pre-Install Prep
We set install dates that work around your household or business. A few weeks ahead, we'll ask you to stop using tire shine, silicone sprays, and protectant products in the space. You'll get a checklist for clearing the room, including wall-mounted items near the stem walls. The day before, the floor should be swept and free of anything that might leak onto the slab overnight.
Step 5 — Grinding, Edge Prep, and Repairs
Install day starts with masking walls, door tracks, and anything that has to stay. We diamond grind the main floor, then hand-grind the edges, corners, and stem walls so every surface has the same profile. Cracks and pits get filled and ground flush, and the weatherstrip at the garage door is protected or lifted so the coating can run cleanly under the door line. A thorough vacuum and a final wipe remove the fine dust that would otherwise show up as specks in the finish.
Step 6 — Base Coat, Broadcast, and Clear Topcoat
The base coat is cut in along the edges with a brush first, then rolled across the field in sections for an even film. For flake floors, we broadcast evenly across the whole surface, all the way to the walls, then scrape and vacuum off loose chips so the texture feels consistent underfoot. Metallic floors are worked by hand to create the pattern you picked. The clear topcoat goes on last, rolled in overlapping passes and back-rolled to prevent lines and thin spots.
Step 7 — Raking-Light Walkthrough and Punch List
Once the floor can take foot traffic, we walk it with you using a work light held low to the surface, which reveals roller lines and missed spots that overhead lights hide. We check the stem walls, door line, and transitions together. Anything that doesn't meet the standard in your estimate goes on a punch list, and we take care of it before the job is closed out. You'll also get clear timing for when shelving and vehicles can return.
Ready for a Floor That Holds Up?
Tell us about your garage, basement, shop, or commercial space, and we'll set up a time to look at the concrete in person. You'll get a clear recommendation, an itemized quote, and a realistic timeline before anything goes on the calendar. Reach out to request a quote or check availability in your area.